SUP and with DC12V Car Plug Rechargeable Air Pump AC 110v-220v Power Electric for Paddle Board

Electric Pump with Detached Battery, DC12 Voltage Power and AC110-220V Home Power for Choice

Description:

An electric pump a device designed to inflate different inflatable stuffs up to 20psi such as stand-up paddle boards (SUPs) using an electric motor. This pump is convenient because it saves time and physical effort compared to manual pumps. This is a 12-Volt, high-pressure Auto Electric pump. It features both an inflation and a deflation port and inflates up to 20 PSI. This dual stage pump is fantacy for use on inflatable stand-up paddle boards, inflatable kayaks, and inflatable docks. It is powered via a car plug or a detached battery or AC home power plug and includes a digital screen for easy to read real time monitoring, and a non-kinking hose.

One and the Only Electric Pump for Paddle Board in the World:

The Pressure Asked by Different Inflatable Stuffs:

1. Stand-Up Paddle Boards (SUPs):

   • Inflatable SUPs usually require between 10 to 20 PSI, with most models falling around 12 to 15 PSI for optimal performance.

2. Kayaks:

   • Inflatable kayaks typically require around 1.5 to 3 PSI. Some high-performance models may go up to 4-6 PSI.

3. Inflatable Boats/Rafts:

   • Small inflatable boats and rafts often require between 2 to 4 PSI for the main air chambers.
   • High-pressure inflatable floors in some boats can require up to 10-15 PSI.

4. Inflatable Tubes (for towing behind boats):

   • Towable tubes generally require around 2 to 3 PSI.

5. Kitesurfing Kites:

   • Leading-edge bladders typically need around 6 to 12 PSI.

6. Inflatable Water Parks (slides, trampolines, etc.):

   • Large inflatables designed for use in water parks usually require around 1 to 2 PSI, though specific requirements can vary based on the design and manufacturer.

7. Windsurfing Boards:

   • Inflatable windsurfing boards typically require around 12 to 15 PSI

8. Airbeams:

   • Inflatable beams or tubes that support the structure of the tent usually require around 4 to 8 PSI. Some models may have slightly different requirements, so it’s important to refer to the manufacturer’s instructions.

It's essential to refer to the manufacturer's guidelines for the specific pressure requirements of your water tool. Using the correct pressure ensures optimal performance and safety.

Whole kit included:

1	Portable cloth bag
2	The electric pump
3	A detached battery, Capacity:5000mAH
4	The charger for battery charging using at home with 1 meter cord.(Plug style can be chosen, such as UK style, US style, Europe style and so on)
5	Cigarette plug for battery charging using in the car with 1.5meters cord
6	DC12V detached power cord with car cigarette plug 2.25meters
7	AC110-220V detached home power cord with direct plug 1.5meters
8	1 meter flexible hose
9	6 nozzles for different inflatable tools such as SUP, kayark, inflatable tent and so on