DC 12V Electric Digital Display AC110V-220V Sup Pump With Rechargeable Lithium Battery
Description
electric paddle board pump, also known as an electric SUP (Stand-Up Paddleboard) pump, is a device specifically designed toinflate stand-up paddleboards. These pumps use an electric motor to generate air pressure, making the process of inflating paddleboards quicker and easier compared to manual hand pumps.
Electric pump
- Battery-Powered: Portable and convenient, these pumps are powered by rechargeable batteries.
- 12V Pumps: Often powered by a car’s cigarette lighter socket, these pumps are ideal for on-the-go inflation.
- AC-Powered: Plug into standard electrical outlets, suitable for home use or locations with electrical access.
1.Fast inflation It only takes 6’40 ” to fill a paddle board with 0-15psi It can continuously inflate 20 paddle board 2. With three power supplies with DC 12V,AC 110-220V and battery 12V 5000mAh three power supplies.Can be used in a variety of environments(At home or outdoors) Lithium battery packs are available in AC and DC charging modes
3. 2 in 1 inflating and deflating function
4.Digital gauge can changed the unit of pressure and the amount of pressure
5.wide range of application with 6 gas nozzles,can inflate a variety of items
This electric sup pump not only has a very fast inflation speed, but also in the product design to maximize the user's convenience.Customers can use it anywhere because it has three power sources. It can be used to inflate paddle board, inflatable boats, camping tents, etc., because it comes with multiple nozzles.
Usage Situation
How to Use an Electric Paddle Board Pump:
1. Setup:
* Attach the Hose: Connect the pump hose to the paddleboard's inflation valve.
* Choose the Power Source: Plug the pump into a 12V car outlet, use a rechargeable battery, or connect it to an AC power source, depending on the pump's capabilities.
2. Inflation:
* Set Desired Pressure: Use the pump's controls to set the desired pressure (PSI/BAR) for your paddleboard.
* Start the Pump: Turn on the pump. It will automatically inflate the board to the set pressure and then shut off to prevent over-inflation.
* Monitor: Keep an eye on the pump during operation, although most modern pumps are designed to require minimal supervision.
3. Deflation (if applicable):
* Switch to Deflate Mode: If the pump has a deflation function, switch to this mode to quickly deflate the board for easy
packing.
4. Disconnect and Seal:
* Remove the Hose: Once inflation is complete, disconnect the hose and securely close the board's valve.
Electric paddle board pumps enhance the paddleboarding experience by making the process of inflating and deflating boards quick,easy, and efficient, allowing users to focus more on enjoying their time on the water.
